Table of Contents
Advertisement
The default exchange line access number on the PBX is 0 in the factory
settings. However, this can be changed. Note that changing the
exchange line access number restricts the phone numbering plan.
Name
Freely selectable name. This name is used to identify the alarm within the
PBX.
Alarm type
Note: You can select all alarm types for one alarm.
Alarm start
The Action URL will be assigned to the alarm type Alarm start. When an
alarm is triggered, the Action URL is sent.
Note: If an alarm delay time was entered, the alarm call via the Action
URL starts after the alarm delay time.
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
Settings – Devices
Action URLs
789
Advertisement
Table of Contents
