Auerswald COMmander 6000 Advanced Information page 495

Pbx for internet/isdn telephony
Hide thumbs Also See for COMmander 6000:
Table of Contents

Advertisement

Select as short a time as possible, because the PBX does not forward
the entire phone number to the public exchange until the specified time
has passed.
Approximately three seconds is the default value for manual inputs.
SIPS URL structure
Requirements:
External VoIP channel that supports SIPS (optional, see Technical Data
in the Instructions)
A certificate for the VoIP provider stored in the PBX

This provider encrypts external connections to prevent listening in.
The processes used to set up and shut down a connection, and signalling,
are all encrypted by SIPS.
SIPS
Encryption of SIPS via TLS.
SIP/TLS
Encryption of SIP via TLS.
Note: SRTP is used to encrypt call data.
Disable host name check

No verification whether the certificate belongs to the domain/IP.
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
Settings – Public switched tel. networks
Voice over IP (VoIP)
495

Advertisement

Table of Contents
loading

This manual is also suitable for:

Commander 6000r

Table of Contents