Table of Contents
Advertisement
•
On each reception phone, assigning a hotel room key each for each
room phone to be managed (optional, see the phone manual).
Note:
If a check-in or check-out operation is in progress, the hotel reception
phone will not be accessible for incoming calls during this period of time
(the caller will hear the busy signal). It is recommended to configure call
forwarding on busy for cases like this.
Note that the option of entering internal calls into the caller list must be
enabled if the reception phone should inform hotel guests of why their
calls could not go through.
•
Assigning a room key on each room phone for call charge queries and
for setting up wake-up times (optional, see the phone manual).
Note: In order to avoid misunderstandings when querying call charges,
the value configured in the system phone for the cost per call unit must
correspond to the value configured in the Configuration Manager
(optional, see the phone manual).
•
Configuring the SFTP transfer and switch on the SFTP server if an
evaluation programme shall have access to the provided data (e.g. call
data list).
– Using the Configuration Manager (page Administration > IP
configuration > SFTP server)
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
Functions, Uses, Concepts
Hotel Function
95
Advertisement
Table of Contents
