Table of Contents
Advertisement
Settings – Administration
IP Configuration
IPv6 mode
If IPv6 is switched on, an IP address complying with version 6 of the Internet
protocol can be assigned to the PBX. Thanks to the greater length of IPv6
addresses (eight blocks with four digits each, example:
3001:00FF:ABC0:0EAC:0001:0000:0000:000F), IPv6 offers a greater
number of available IP addresses than version 4 of the Internet protocol
(IPv4).
disabled
Switches the use of IPv6 addresses off.
SLAAC
Automatically assigns an IPv6 address to the PBX.
static
Assigns a user-defined IPv6 address to the PBX.
Note: If IPv6 has been disabled for the PBX, IPv6 can also not be
enabled for any modules. If, in the reverse, IPv6 has been enabled for
the PBX, it is also enabled automatically for all modules and cannot be
disabled.
IPv6 settings
Requirements:
•
IPv6 status IPv6 static selected
998
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
Advertisement
Table of Contents
