Auerswald COMmander 6000 Advanced Information page 381

Creating, Deleting, Searching for, and Sorting Table Entries
Creating Entries
1. Click New.
2. Fill in the empty entry fields.
3. Click Save.
4. Repeat steps 1 to 3 to create additional entries.
Notes:
If you want to create multiple entries simultaneously, enter the required
range in the From and To entry fields, and then click
In extendible lists the lower toolbar displays information about the actual
and maximum possible number of entries in the table. Dongle functions
(identified by
number is the active number and the third is the maximum number that
can be enabled via the dongle.
Deleting entries
1. Mark the entry and click
Searching for entries
1. Click in the open field in the header of the column that you want to
search, such as Number or Name and enter the search term.
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
Slider for making a setting. Sometimes, the exact values
are displayed in front or behind the slider.
) have three numbers. In this case, the second
Introduction to the Configuration Manager
Delete.
Configuration Manager
Save.
381