Table of Contents
Advertisement
Settings – Devices
Voice mail/fax boxes
A caller can set up a connection to a deputy. For this purpose, the
caller dials
1
via DTMF during the announcement or recording phase.
Destination number
Enter an internal or external phone number.
Note: For an external number that has less than five digits, the local area
code should aditionally be entered.
Announcement with enabled deputy function
Select an announcemnet that is replayed for callers if the deputy function is
enabled.
Call acceptance/announcement
The call acceptance of the voice mailbox can be configured to show different
behaviour for different call types. The Call acceptance/announcement
defines the standard behaviour for the case that no Call-specific
behaviour applies.
Requirements:
•
Readiness enabled
•
Disabled Replacement function
•
If Box announcement is selected: the corresponding announcement
saved in the PBX
712
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
Advertisement
Table of Contents
