The default exchange line access number on the PBX is 0 in the factory
settings. However, this can be changed. Note that changing the
exchange line access number restricts the phone numbering plan.
Name
Freely selectable name. This name is used to identify the door terminal
within the PBX and the connected system phones. The name can also be
transferred to the VoIP end devices via LDAP server.
Module
Port
Module and port to which the device that can be used as door terminal (e. g.
a TFS Universal-Plus) is connected.
Configure
Opens the configuration of the door terminal.
Door terminal calls+Relay
Relay
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
Settings – Devices
Door Terminals
743