Settings – Routing
Soft-LCR 4.0
Create
Requirements:
•
Created own local area code
The networks City, Region, National and International can automatically
be created based on the local area code. The include the data for the Area
code/Area code range.
Important: When networks are created automatically, the existing LCR
data is deleted.
Name
Freely selectable name. This name is used to identify the network within the
PBX. (Select
Configure
Opens the configuration of the networks and the corresponding prefixes.
New
Adds a new network to the list.
Up to 60 networks can be created manually.
804
New to enter.)
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018