Table of Contents
Advertisement
Settings – Administration
IP Configuration
Subnet mask
Enter the IPv4 address of the subnet mask in the range 0 to 255 (example:
255.255.255.0).
Gateway
Enter the IPv4 address of the gateway in the range 0 to 255 (example:
192.168.0.2).
Permanent IP address from the APIPA address range
Under certain conditions, the PBX can be accessed via the permanent
IP address.
•
The PBX is not connected to a router but is connected directly to a
single PC which receives its IP address automatically (default setting on
Windows and Mac OS X)
•
The PBX is connected to a router that works as a DHCP server and
allocates IP addresses to the devices connected (default setting on
most routers)
IPv6 Configuration
Opens the IPv6 configuration.
IPv6 mode
If IPv6 is switched on, an IP address complying with version 6 of the Internet
protocol can be assigned to the PBX. Thanks to the greater length of IPv6
addresses (eight blocks with four digits each, example:
994
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
Advertisement
Table of Contents
