Pick-Up And Call Take-Over - Auerswald COMmander 6000 Advanced Information

Functions, Uses, Concepts

Pick-up and Call Take-over

Pick-up and Call Take-over
Using Pick-up, you can take a call on your own phone that was originally
sent to another internal phone.
If the call has already been taken, the call can be taken using same
procedure if the call take-over has been allowed by the subscriber being
called. This function is useful, for example, in the case of answering
machines.
Proceed as follows for configuration:
• Switching authorisation for pick-up for the involved internal phones on.
– Using the Configuration Manager (page Subscriber (scr.) >
Properties > Authorisations)
• Switching call take-over for the involved internal phones on.
– Using the Configuration Manager (page Subscriber (scr.) >
Properties > Settings)
140
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018