Auerswald COMmander 6000 Advanced Information page 383

Some functions or resources will need to be released or
extended via PBX dongle (see page Administration >
Activation).
For extendable functions 3 digits appear after the dongle
symbol (e.g. 31/100/112). The first digit (31 in the example)
shows the currently configured number,the second number
(100 in the example) the released number and the third
number (112 in the example) the maximum possible number
to be released via Dongle.
Configuration pages
Opens the help page for the corresponding setting point.
Placing the cursor over the symbol displays or hides infor-
mation about the corresponding help topic (tooltip).
Back: leads you back to the previous configuration page.
Carries out an action.
Closes the window.
Opens a page where additional settings can be made.
On the user interface of the (Auerswald) Remote Access
Server opens the login dialogue of the Configuration Manager.
Opens a chart.
Opens a window to send an e-mail.
Lets you subscribe to an RSS feed.
Opens the page to configure system e-mails.
Opens a window to edit the corresponding line.
Shows that a sent fax was transmitted successfully.
Shows that a sent fax was not transmitted successfully.
Shows that a received fax was transmitted successfully.
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
Configuration Manager
Introduction to the Configuration Manager
383