Table of Contents
Advertisement
Sub-system operation
Like any other PBX for which the VoIP provider has been configured,
the PBX can be used as a sub-system.
Note: During sub-system operation, single-digit dialling may cause
problems. In this case, en-bloc dialling is usually enabled.
Connect audio through
The connection between the caller and the PBX is always created
when a call is forwarded externally. As a result, the caller will hear all
replayed elements (tones, announcements) which are played by the VoIP
provider when the connection with the call forwarding destination is estab-
lished.
If external call forwarding is configured over a VoIP provider, the call
tone may not be replayed for the caller (the connection to the call forwarding
destination number will therefore be switched through in a "surprising" way).
The provider has emergency call ability
Requirements:
•
the associated VoIP provider must allow emergency calls
It is possible to make an emergency call using this provider and the
account assigned to them.
This provider does not support emergency calls. When you attempt to
dial an emergency number, you will hear the announcement, "This phone
does not allow emergency calls. Please use an alternative."
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
Settings – Public switched tel. networks
Voice over IP (VoIP)
503
Advertisement
Table of Contents
