Table of Contents
Advertisement
Settings – Devices
Door Terminals
DTMF sequence
Requirements:
•
Created switch input for an analogue device
Specifies which DTMF sequence the PBX detects, for example,as the
actuation of a door bell button to then trigger an alarm or a door call. For
information about which DTMF sequences the connected device sends, see
the manual of the device in question.
Note: The DTMF sequence usually is the phone number assigned to the
door bell button within the door terminal.
SIP invite
Requirements:
•
Created switch input for a VoIP device
Specifies which SIP invite the PBX detects, for example,as the actuation of
a door bell button to then trigger an alarm or a door call. For information
about which SIP invite the connected device sends, see the manual of the
device in question.
Note: The SIP invite usually is the phone number assigned to the door
bell button within the door terminal.
750
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
Advertisement
Table of Contents
