Table of Contents
Advertisement
Variants for firmware updates:
•
Manual firmware update of the PBX.
– Using the Configuration Manager (page Administration > Firmware
update/restart)
•
Firmware update of the PBX via update server.
– Using the Configuration Manager (page Administration > Firmware
update/restart)
•
Firmware update for system phones.
– Using the Configuration Manager (page Administration > Firmware
update/restart)
•
Restoring the firmware of the PBX.
– Using the Configuration Manager (page Administration > Firmware
update/restart)
– By pressing a button on the PBX
Distributing Firmware
A new version of the firmware can be distributed from one system phone to
other system phones connected to the PBX. To configure an IP system
phone as firmware distributing phone, see Advanced Information of the
phone. Under Administration > Firmware update/restart, you can see
under Firmware update for Voip system phones the current status.
Notes:
The PBX must have a firmware version as of 6.6.
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
Functions, Uses, Concepts
Firmware Update
69
Advertisement
Table of Contents
