Table of Contents
Advertisement
You must enter all the extension numbers for a PTP connection that is
not running linear call distribution.
Ringtone for the above-mentioned PTP connection
The ringtone specifies which sequence of sounds is used to signal external
calls to the phone numbers of the PTP connection to internal subscribers on
the PBX.
Notes:
Individual ringtones can be assigned to extension numbers that were
input in different ways.
See the Functions, Uses, Concepts > Ring tones section for information
about exceptions to signalling and sound sequences.
Direct Dial In (DDI)
If you want an extension number to be different from the ones used in linear
call distribution, or if an extension number is needed for a different function
(e.g. remote configuration, CLIP no screening), you must also enter it in the
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
Settings – Public switched tel. networks
Voice over IP (VoIP)
523
Advertisement
Table of Contents
