Table of Contents
Advertisement
3. Enable the Logout check box for the corresponding subscriber.
4. Click
Save.
Note: If the mobile handset is logged out, the unnecessary internal
number can be deleted (Subscriber (scr.) > Phone numbers).
Using the Configuration Manager to Configure a Function Key
for PBX Functions
The
function key on a COMfortel DECT 900/900C Handset can be
assigned to up to ten programming functions on the PBX.
Proceed as follows:
•
Using the Configuration Manager
Requirements:
•
COMfortel DECT 900 Base connected to the internal S
•
COMfortel DECT 900/900C Handsets
•
Configured and assigned internal numbers for the COMfortel DECT
900/900C Handsets
1. Open the page Subscriber (scr.) > COMfortel DECT.
2. Select the DECT base in the list field under DECT base.
3. Click Assign keys in the line of the corresponding mobile handset.
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
Settings – Subscriber (scr.)
COMfortel DECT
port
0
589
Advertisement
Table of Contents
