Auerswald COMmander 6000 Advanced Information page 691

Pbx for internet/isdn telephony

Hide thumbs Also See for COMmander 6000:

Table of Contents

Restoring boxes

Due to missing data in on the data storage device (e. g. because of an

exchange) or in the database of the PBX, the affected boxes are not ready

The boxes affected by this function are marked with

Missing data on the data storage device

Note: The restoration of the boxes does not include the messages, box-

specific announcements and language files.

Missing data in the database on the PBX

You can restore these boxes using the following data:

Internal number and name of the box

Box-specific announcements

Note: Internal numbers must only be assigned once in the PBX. The

former phone number of the box to be restored cannot be used if it is still

present in the PBX as an internal number (page Overviews > Phone

numbering plan > Total overview).

Select one of the available options.

COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018

Settings – Devices

Voice mail/fax boxes

Commander 6000r