Table of Contents
Advertisement
Settings – Devices
Device Wizard
IP configuration
IP address
Enter the IP address required by the connected device. Possible entries: IP
address with a range of 0 to 255 (example: 192.168.0.240).
Port
Enter the port required by the connected device. Possible entries: 1 to
65535.
User name
Enter the user name (authentication data to control the relays).
Password
Enter the password (authentication data to control the relays).
Relay X, Switch input X
Name
Enter the names of the relays and switch inputs.
Destination number
Select or enter the required call destination (external number, short-code
number, internal number of the individual phone, internal number of the
group).
Notes:
The call destination is first entered identically for all configurations. It can
be changed later.
736
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
Advertisement
Table of Contents
