Table of Contents
Advertisement
Settings – Subscriber (scr.)
Properties / Function overview
If the number presentation only needs to be suppressed call by call, the
number presentation (outgoing) must be configured as Standard or
Exchange line dependent. For the Exchange line dependent option,
each exchange line can have an individual number presented to the
network provider or to the caller separately. The number presentation to
the caller is suppressed by the phone before starting a call. The number
presentation to the network provider is not suppressed by the phone.
If the number presentation should always be suppressed, the number
presentation (outgoing) must be configured as Exchange line
dependent. For each exchange line can a separate number be
presented to the network provider. To keep these numbers from being
presented to the caller, number presentation can be suppressed per
exchange line separately.
If number presentation needs to be suppressed between the PBX and
the network provider, the number presentation (outgoing) must also
be configured as No.
For the option No, the phone service Calling Line Identification
Restriction (CLIR2) must be released by the network provider.
606
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
Advertisement
Table of Contents
