Emergency Calls; Settings Emergency Calls - Auerswald COMmander 6000 Advanced Information

Emergency calls

Topics
– Settings Emergency Calls (page 427)

Settings Emergency Calls

Proceed as follows:
• Using the Configuration Manager (page Public switched tel. networks
> Emergency calls)
Emergency Call Priority

An external line is definitely made available from the PBX when
dialling the emergency number or if an alarm is detected. If necessary, a call
can be interrupted to enable an emergency call to be made.
Important: If Emergency Call Priority is disabled and other calls are
being made during an emergency, there is a risk that the emergency call
cannot be made immediately.
Note: The emergency call priority switch is enabled for the entire PBX.
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
Settings – Public switched tel. networks
Emergency calls
427