Settings – Time Control
Switching Times
Time
Time (format hh : mm) when the selected configuration is to be activated.
(Select
New to enter.)
Notes:
A configuration applies until another configuration (manual or automatic)
is enabled, also beyond the daily change. An exception is the transition
from a holiday to a normal weekday. In this case, the configuration
activated for the holiday will only be active until 23:59. The normal
configuration for a weekday will be activated at 0:00 of the following day
(even if a configuration was activated manually on the holiday).
Configuration
Configuration to be activated.
Wake-up announcement
Defines which wake-up announcement the user hears when accepting a
wake-up call. Three wake-up announcements are available to indicate the
time of day.
New
Adds a new switching time to the list. For this switching time settings must
be configured.
798
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018