Auerswald COMmander 6000 Advanced Information page 1000

Pbx for internet/isdn telephony
Hide thumbs Also See for COMmander 6000:
Table of Contents

Advertisement

Settings – Administration
IP Configuration
First DNS server
Second DNS server
IPv4 address
Four blocks separated by a dot (.).
IPv6 address
Eight blocks separated by a colon (:).
Note: Click Test connection, to check functioning of the Internet
connection. The PBX will then send a Ping command to test whether
www.google.de can be reached. www.google.de has been chosen
because it can usually be reached
A DNS server is necessary for Internet access. The data is specified by the
Internet service provider or system administrator of the network.
Requirements:
DHCP disabled or DHCP enabled and Use own DNS server enabled
Use own DNS server
Requirements:
DHCP enabled

Despite the enabled DHCP client, the DNS server set here is used.

If the DHCP-Server is enabled, the PBX receives the DNS server
address automatically from a DHCP server.
1000
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018

Advertisement

Table of Contents
loading

This manual is also suitable for:

Commander 6000r

Table of Contents