Auerswald COMmander 6000 Advanced Information page 594

Settings – Subscriber (scr.)
COMfortel DECT
• Assigned internal numbers for the mobile handsets
1. Open the page Subscriber (scr.) > COMfortel DECT.
2. Select the DECT base in the list field under DECT base.
3. Click Copy keys in the line of the corresponding mobile handset.
A configuration window for copying function keys opens.
4. Select or clear the Transfer of phone numbers to the destination
phones check box.
5. Select the phone number of the source in the list field under Source
(number of the COMfortel DECT handset).
6. Select or clear the required check boxes under Target.
7. Click Save.
Note: The PBX begins to distribute the data to the mobile handsets in
question. If a mobile handset is currently not ready for the data transfer
(disabled, out of range or busy with a call), the PBX makes an attempt
with the next mobile handset after a few minutes until all of the data is
distributed. During the data transfer (duration: up to two minutes), the
mobile handset is not available and "Copying from PBX" is shown on the
display.
8. Click Close.
594
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018