Auerswald COMmander 6000 Advanced Information page 765

Number of alarm loops
Specifies how many alarm loops are to be performed before the alarm is
acknowledged.
Alarm announcement
Select the announcement to be played to alarm subscribers.
Alarm subscriber (destination number) x
Select up to four internal or external phone numbers to be called when the
PBX performs an alarm loop.
Entering the destination number
Use this to enter a phone number manually.
Possible entries:
External number
Short-code dialling number
Internal number of the individual phone
Internal number of the group
Notes:
The default exchange line access number on the PBX is 0 in the factory
settings. However, this can be changed.
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
Settings – Devices
Alarms
765