Accepting An Alarm Call And Confirming The Alarm - Auerswald COMmander 6000 Advanced Information

Pbx for internet/isdn telephony

Hide thumbs Also See for COMmander 6000:

Table of Contents

Requirements:

Configured door terminal

Configured door call

Configured relay with operating mode Door opener

Authorisation Open door assigned to subscriber or group

1. Pick up the receiver.

Note: During an existing call press the Flash key or the Query key and

You are connected with the door terminal.

2. Press the Flash key or the Query key.

Accepting an Alarm Call and Confirming the Alarm

An alarm can be signaled by the ringing of both an internal or an external

phone. To terminate the complete alarm loop (and to switch off relays

assigned to the alarm), the alarm can be confirmed.

Proceed as follows:

Using an internal or external phone

COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018

Incoming Calls

Commander 6000r