Table of Contents
Advertisement
Settings – Public switched tel. networks
Call Distribution
...ISDN PTP connections
...VoIP PTP connections
Internal no. | name
For a PTP connection without linear call distribution or for extensions
differing from linear call distribution, the internal destinations must be
selected.
linear/fallback
The caller will be transferred to the internal number similar to the DDI. If this
phone number is not configured in the PBX, the fallback function will be
used.
Reject call
The caller hears the busy signal.
Internal number: The caller will be transferred to the selected internal
number (subscriber, group, voice mail/fax box or automatic reception).
Note: External numbers, e.g., those used as remote switching/
programming numbers or call through numbers, may not be used in the
call distribution.
546
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
Advertisement
Table of Contents
