Table of Contents
Advertisement
Settings – Administration
IP Configuration
IPv6 address
Enter the IPv6 address of the PBX.
Prefix length
Enter the prefix length in the range
subnet the IPv6 address belongs.
IPv6 Gateway
Enter the IPv6 gateway. Possible entries: Digits, characters and :.
VMF SLOT X/XVOIP SLOT X
Configure the Ethernet configuration on the VMF or the VoIP module.
Note: If you do not want to assign a permanent IPv4 address to the
module, clear the check box Receive the IP address automatically
(DHCP client).
Requirements:
•
Gestecktes COMmander VMF-Modul oder COMmander VMF-R-Modul
bzw. gestecktes COMmander 8/16VoIP-Modul oder COMmander 8/
16VoIP-R-Modul
Receive the IP address automatically (DHCP client)
The PBX automatically receives its IP address from the DNS server.
996
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
1
to 128. The prefix specifies to which
Advertisement
Table of Contents
