Table of Contents
Advertisement
Settings – Devices
Action URLs
Alarm acknowledged
The Action URL will be assigned to the alarm type Alarm acknowledged.
As soon as an alarm subscriber (configured under Devices > Alarms >
Configure > Alarm subscriber (destination number)) acknowlegded the
alarm, the Action URL is sent.
Note: A device that is not recognized by the PBX, cannot acknowlegde
an alarm call by entering the DTMF digit 0.
Alarm timeout
The Action URL will be assigned to the alarm type Alarm timeout. If none
of the alarm subscribers acknowledges the alarm, the alarm call ends after
the set alarm loops and the Action URL is sent.
Link to page Devices > Alarms
Delets the alarm or opens the configuration of the alarm.
790
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
Advertisement
Table of Contents
