Firmware Update/Restart
Topics
–
Management Firmware Updates (page 977)
Management Firmware Updates
Proceed as follows:
•
Using the Configuration Manager (page Administration > Firmwareu-
pdate/restart)
•
To restore firmware, to restart and (only COMmander 6000/R/RX) to
power down the PBX: By clicking a button on the PBX
STORE THE FIRMWARE IN THE PBX (MANUAL FIRMWARE UPDATE)
Start firmware update
Requirements:
•
A firmware file (*.rom) saved on a data storage device (PC)
Note: You can find a new firmware file on the Internet (see
www.auerswald.de/service). Alternatively, you can get a new firmware
file from your specialised dealer.
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
Settings – Administration
Firmware Update/Restart
977