Table of Contents
Advertisement
Phoning
Transferring
procedure will already be cancelled after the first 60 seconds and the
external call will be disconnected.
Placing Communication Partner in Waiting Loop
If the internal subscriber to which you want to transfer an communication
partner is busy, you can place the communication partner in the waiting loop
of this subscriber.
Requirements:
•
Internal transfer destination is a group (at least one subscriber logged
in as incoming) or a subscriber
If the internal phone to which you are trying to transfer a call is busy, proceed
as follows:
1. Wait.
You will automatically be reconnected with the waiting communication
partner.
Note: On many ISDN phones, the termination of a query call on busy is
not performed automatically, but via a function key or via the menu
(optional, see manual for the phone).
2. Press the Flash key or the Query key.
3. Dial ##07.
276
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
Advertisement
Table of Contents
