Call Forwarding
Call forwarding allows calls to be forwarded, e.g., to a mobile phone.
The PBX support three different call forwarding types:
•
Call forwarding for subscribers
•
Call forwarding for groups
•
Call forwarding for external numbers
As there can be many different reasons for not accepting a call, for example,
the subscriber in question is not present or is on another line, three call
forwarding types are provided:
CF unconditional: The phone being called does not ring. The call is
forwarded immediately.
CF on busy: The call is forwarded immediately but only if the phone being
called is busy.
CF on no reply: The phone being called rings for a certain amount of time.
If the call is not accepted, it is forwarded.
Note:
A different destination can be configured for each of the three call
forwarding types.
If CF on busy and CF on no reply are enabled at the same time, both
types apply. Depending on which case occurs – the phone is busy or
nobody answers it – the call is forwarded to their respective phone
numbers.
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
Functions, Uses, Concepts
Call Forwarding
163