Checking The Function Of The Lan-Tapi - Auerswald COMmander 6000 Advanced Information

Pbx for internet/isdn telephony

Hide thumbs Also See for COMmander 6000:

Table of Contents

Functions, Uses, Concepts

2. Follow the installation by clicking Next.

3. Depending on the driver version, the driver may need to be activated at

this point. If you do not want to activate it yet, click the Activate later

4. In the IP address of the PBX entry field, enter the IP address of the

PBX. Enter the network port of the TAPI server in the Port entry field.

Enter the password for the network connection of the TAPI server in the

Password and Repeat password entry fields. Click OK.

5. Click Close.

6. Restart the PC.

Checking the Function of the LAN-TAPI

To perform a simple function check of the TAPI driver (TSP) as well as the

settings configured in the PBX, use the dialling help on Windows on the

Proceed as follows:

Using the server PC

Requirements:

A completed TAPI drive installation on the server PC

Operating system: Windows 10

COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018

Commander 6000r