Table of Contents
Advertisement
S0 Ports
Use
free
Port is not used and port is not taken into account for the calculation of the
total number of existing ports/call channels.
internal
Port is used as internal port.
external
Port is used as external port.
Connection type
The connection type for the ISDN connection that the network provider has
provided for the NT needs to be configured for the external S
Note: No selection of the connection type is possible for internal S
ports. They are fixed on PTMP connection.
PTMP connection
ISDN PTMP connection (Point-to-Multipoint) with up to ten multiple
subscriber numbers (MSNs).
PTP connection
ISDN PTP connection (Point-to-Point) with a PBX base number and Direct
Dial In numbers (DDI numbers).
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
Settings – Hardware
Port configuration
port.
0
0
417
Advertisement
Table of Contents
