Table of Contents
Advertisement
Preferred exchange line business Expert
Preferred exchange line private Expert
Defines via which exchange line outgoing external calls will be routed.
Automatic occupation
For outgoing external calls, any available connection is used, whereby first
the fixed network connections and then the VoIP connection and at last the
GSM connections were taken into account.
Special preferred exchange lines
For outgoing external calls, the connections released under Expert are
used depending on the selected priority. This makes the definition of a
preferred exchange line (priority = 1) with overflow to other connections
(priority > 1) possible. Exchange lines with priority No automatic
occupation are not used for outgoing calls.
Note:
If all released connections are busy, it is no longer possible to call. The
subscriber can only use a connection with the setting No automatic
occupation by entering a character string (see chapter Short Reference
> Targeted Exchange Line Access).
The same priority may be allocated to different external connections in
parallel.
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
Settings – Subscriber (scr.)
Profiles
573
Advertisement
Table of Contents
