Settings – Devices
Device Wizard
Enter the request that is assigned to the door bell button within the door
terminal. Possible entries: Digits and characters (Possible entries: *, #).
Destination number
Select or enter the required call destination (external number, short-code
number, internal number of the individual phone, internal number of the
group).
Notes:
The call destination is first entered identically for all configurations. It can
be changed later.
If a door call should also be executed via VoIP accounts or GSM
gateways, in any case the external number must be entered with the
corresponding city code, even if it is the local prefix.
To create further configurations for a door terminal, open the page
Devices > Door terminals and click Configure in the line of the corre-
sponding door terminal.
734
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018