Table of Contents
Advertisement
Settings – Public switched tel. networks
ISDN connections
All outstanding digits are transferred via DTMF.
No T310 for Info boxes
Note: This is a country-specific setting (only relevant in Italy).
T310 is a timer for ISDN that disconnects a call connection after a certain
time.
The call is not disconnected after a certain time.
Routing
Use Soft LCR 4.0 for this connection
Requirements:
•
Network provider must support the dial-around service
•
Configured prefixes (country prefix and local area code)
•
Configured LCR (see Functions, Uses, Concepts > LCR section)
The ISDN connection is used for LCR calls.
Notes:
LCR must be disabled if the network provider does not support LCR.
466
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
Advertisement
Table of Contents
