Table of Contents
Advertisement
Settings – Devices
Alarms
The default exchange line access number on the PBX is 0 in the factory
settings. However, this can be changed. Note that changing the
exchange line access number restricts the phone numbering plan.
Name
Freely selectable name. This name is used to identify the alarm within the
PBX.
Enable alarm
off
The alarm input is disabled. It is not possible to initiate an alarm.
once
The alarm can be initiated only once. Subsequently, the alarm input will be
disabled and will have to be enabled once again.
always
After an alarm is triggered off, the alarm input continues to be enabled. A
further alarm can be triggered off.
Configure
Opens the configuration of the alarm.
760
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
Advertisement
Table of Contents
