Auerswald COMmander 6000 Advanced Information page 205

Configuring the Printer Driver COMpact/COMmander Fax
Before transferring the first fax using the COMpact/COMmander Fax
printer driver, at least one fax box of the PBX has to be configured in the
printer driver.
Requirements:
• Installed printer driver COMpact/COMmander Fax
1. To open the printer driver, print a test document, e. g. a Word document,
using the print function of the PC programme. Via the printer selection,
select the printer driver COMpact/COMmander Fax.
2. If necessary, enter a name for your identification in the entry field Name
of the fax box.
Note: It is appropriate to use the same name that has been assigned for
the fax box in the Configuration Manager of the PBX.
3. In the Subscriber / Group number entry field, enter the internal
number of the owner of the fax box in question.
4. In the User Password entry field, enter the password of the subscriber
or of the group member in question.
Important: By enabling the check box Display PIN, the entered
password will be displayed uncoded. In order to ensure that a password
cannot be viewed by unauthorised persons, a user should always lock
the access to his/her PC or completely log off his/her PC when leaving
the room.
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
Functions, Uses, Concepts
Voice mail/Fax Boxes
205