Table of Contents
Advertisement
•
Immediate restart.
– Using the Configuration Manager (page Administration > Firmware
update/restart)
– By pressing a button on the PBX
Note: During an immediate restart, no consideration is made of existing
calls. This means that all connections to the web server, all calls and all
data services closed immediately. Unsaved data is lost.
•
Delayed restart.
– Using the Configuration Manager (page Administration > Firmware
update/restart)
Note: A delayed restart runs just like an immediate restart, except that
current calls are taken into consideration. As soon as all of the existing
calls have ended (also before the expiration of the time specified), the
PBX restarts. During the delay, the PBX prevents new calls from being
established. If a call is still active when the timeout occurs, the call is
interrupted in order to carry out the restart.
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
Functions, Uses, Concepts
Restart
131
Advertisement
Table of Contents
