Table of Contents
Advertisement
Profiles
Profiles can be created for subscribers, groups, and voice mail/fax boxes.
These profiles control the behaviour by determining the properties. In this
way, analogue behaviour can be reached via the configuration-dependent
assignment of profiles. When creating the profiles, it can be determined
whether the individual settings from the profile can be changed via the
properties of the subscriber, group, or the boxes or not.
Proceed as follows for configuration:
•
Create profiles for subscribers and assign them depending on the
configuration.
– Using the Configuration Manager (on the following pages)
– Subscriber (scr.) > Profiles > Configuration
– Subscriber (scr.) > Profiles > Profile assignment
•
Create profiles for groups and assign them depending on the configu-
ration.
– Using the Configuration Manager (on the following pages)
– Groups > Profiles > Configuration
– Groups > Profiles > Profile assignment
•
Create profiles for voicemail and fax boxes and assign them depending
on the configuration.
– Using the Configuration Manager (on the following pages)
– Devices > Voice mail/fax boxes > Profiles > Configuration
– Devices > Voice mail/fax boxes > Profiles > Profile assignment
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
Functions, Uses, Concepts
Profiles
145
Advertisement
Table of Contents
