Auerswald COMmander 6000 Advanced Information page 980

Pbx for internet/isdn telephony
Hide thumbs Also See for COMmander 6000:
Table of Contents

Advertisement

Settings – Administration
Firmware Update/Restart
Configured DNS server and, if necessary, an HTTP proxy server (page
Administration > IP configuration)
COMfortel 2500, COMfortel 1500, COMfortel 1100: Entered phone
number of the update server (+49 5306 9200510) into the phones (e.g.
via COMfortel Set)
If the regular firmware update option is enabled, you can specify the
frequency and time period in which the system is to look for new firmware.
The firmware update is then triggered automatically once a connection to
the update server has been set up and new firmware has been found.
ISDN COMfortel firmware update

Enables the regular firmware update of all connected ISDN COMfortel
system phones.
Update status
If an update of the PBX has been initiated from the update server, you will
find the following information :
Update status: information about the update that is currently being
performed. An error message appears if the update encounters a
problem
Date of the last update attempt
Date of the last successful update
980
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018

Advertisement

Table of Contents
loading

This manual is also suitable for:

Commander 6000r

Table of Contents