Settings – Administration
Firmware Update/Restart
A firmware file (*.rom) is saved in the PBX via the Configuration Manager
and the firmware is enabled after a reboot.
Automatic restart
Automatically restarts the PBX after a click on
the firmware. The step Initiate reboot will be skipped.
Initiate reboot
Restarts the PBX and enables the firmware.
Select and import a firmware file (*.rom) that is stored on a (PC) data storage
device.
FIRMWARE UPDATE VIA UPDATE SERVER
Address of the update server
Address of the update server that consists of four blocks with three digits for
IPv4 addresses or eight blocks with four digits or characters for IPv6
addresses.
Note: The factory settings are already configured with the address of the
update server (www.auerswald-update.de).
978
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
Import and enables