Table of Contents
Advertisement
Alarm Device
The alarm device function permits calls from internal subscribers to be
signalled as alarm calls on system phones. Such alarm calls are acknowl-
edged by a confirmation tone and subsequently ended.
Proceed as follows for configuration:
•
Switching alarm device function on.
– Using the Configuration Manager (on the following pages)
– For admin: Subscriber (scr.) > Properties > Settings)
– For user: Subscriber Properties > Settings)
Note: It makes sense to use the alarm device function in combination
with special calling systems such as the GIRA calling system 834 plus,
for example. Combined with the transmission of the display name, text
messages can be sent and signallised accordingly.
•
If necessary, switching transmission of the display name on.
– Using the Configuration Manager (on the following pages)
– For admin: Subscriber (scr.) > Properties > Settings)
– For user: Subscriber Properties > Settings)
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
Functions, Uses, Concepts
Alarm Device
31
Advertisement
Table of Contents
