Table of Contents
Advertisement
32
Connection of an Input Device for external Music on Hold
Alternatively to the internal Music on Hold you can also connect an
external music device (e.g. a CD player) to a Cinch connector (marked
with „Audio In") on the COMmander 2TSM analog module
necessary you are able to switch on/off the external music source with
the relay function of the COMmander Basic.
Another option may be the connection of a digital music and speech
memory that continuously plays a melody or a text.
The volume control for the external Music on Hold happens via a trim-
mer that is on the module near the Cinch sleeve (labelled with „Volume
Audio In".
With this input, you can also record a music that will be stored as the
new internal Music on Hold in the COMmander Basic.
If you use external Music on Hold, pay attention to the copy-
right issues for certain music. Please contact the correspond-
ing copyright holder or music agency.
On the COMmander 2TSM analog Module you have a Cinch connector
(labelled „Audio Out") as an audio output (for announcements). If you
like to use the Cinch connector as an audio output for announcements,
you will have to connect an amplified loudspeaker system or an active
loudspeaker (see
chapter COMmander 2TSM analog Module on
page
10).
You will also be able to switch on/off the loudspeaker system or another
device with the relay function of the COMmander Basic.
Connection of an Input Device for external Music on Hold
(Pic.
Connect a Loudspeaker System for Announcements
43). If
Pic. 43: Music on Hold
with CD Player
Pic. 44: Loudspeaker for
Announcements
Advertisement
Table of Contents
