Switch Input - Auerswald COMpact 5200 Advanced Information

Functions, Uses, Concepts

Switch Input

Switch Input
If a device that is suitable as switch input (e. g. a door terminal with door bell
buttons) is connected to the PBX, it can then be used to trigger a door call
or an alarm.
Proceed as follows for configuration:
• Creating a switch input for an alarm.
– Using the Configuration Manager (page Périphériques > Alarmes)
• Creating a switch input for a door call.
– Using the Configuration Manager (page Périphériques > Inter-
phones)
• Configuring switch inputs.
– Using the Configuration Manager (on the following pages)
– Périphériques > Alarmes > Entrée >
– Périphériques > Interphones > Appels d'interphone >
172
COMpact 5200/5200R/5500R - Firmware V7.2 - Advanced Information V04 07/2018
)
)