NEC NEAX 2000 Programming Manual page 1006

Integrated voice server, integrated multimedia exchange
Hide thumbs Also See for NEAX 2000:
Table of Contents

Advertisement

(3/3)
SERVICE CONDITIONS (CONT'D)
4. A maximum of 200 messages can be set in one system.
5. Messages can be also set from Feature Dial Tone (with a call on CONSULTATION HOLD).
6. Message indications are backed up by capacitor and are not lost due to power failure or initialization of
the system.
7. In MULTIPLE CONSOLE OPERATION, messages set by one Attendant can be cancelled by another
Attendant.
8. Messages can be set to a station in any status condition (idle, busy, in Line Lockout, etc.). Message
indications are not provided when a Single Line Telephone handset is off-hook.
term
9. When a D
calls a station that is forwarded, and then depresses the MESSAGE REMINDER key,
the message is left at the station to which the call was forwarded.
10. When all stations in a hunt group are busy, messages set by a D
REMINDER key are left at the called station.
11. Voice Mail Systems that provide in-band signalling for this purpose may be able to set MESSAGE
REMINDERS.
12. Operating procedures and service conditions of a message waiting LED on D
those of Single Line Telephone, however the message waiting LED on a D
remain on when the D
Page 224
Revision 1.0
MESSAGE REMINDER-D
term
is off-hook.
ND-91285-001(E)
DECEMBER, 1999
term
(CONT'D)
term
using the MESSAGE
term
term
without LCD, should
without LCD, equal

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Neax 7400 ics m100mx

Table of Contents