[Cm17] Acd/Ucd Group - NEC Univerge NEAX 2000 IPS Command Manual

COMMAND CODE TITLE:
17
FUNCTION:
This command is used to define ACD (Automatic Call Distribution)/UCD (Uniform Call Distribution)
groups.
PRECAUTION:
(1) A maximum of 16 ACD/UCD groups can be assigned per system.
(2) A maximum number of 60 stations can be assigned to a ACD/UCD group.
(3) Prior to changing or deleting the station number within a ACD/UCD group, in CM17 Y=0, it is
necessary to change the data for CM17 Y=1-7 to the initial data.
ASSIGNMENT PROCEDURE:
ST + 17Y + DE
DATA TABLE:
Y
No. MEANING
0 Station numbers to
be included in ACD/
UCD group
NOTE 1: Station numbers should be individually assigned to an ACD/UCD group, as shown below.
1st operation
2nd operation
Last operation
(STN 1-STN n: Station numbers included in a ACD/UCD group)
NOTE 2: After data setting, lift the handset once, to activate the ACD/UCD function, at each ACD/UCD station.
ACD/UCD GROUP
STATION NUMBER (A)
+
(1-8 digits)
STATION NUMBER (A)
DATA MEANING
X Station number (A)
XXXXXXXX
STATION No. (A)
STN 1
STN 2
STN n
DATA
+ DE +
(1-8 digits)
SETTING DATA
DATA
X
XXXXXXXX
NONE
STATION No. (B)
STN 2
STN 3
STN 1
– 270 –
+ EXE
: Initial Data
RELATED
COMMAND
MEANING
Station number (B)
No data
Continued on next page
NWA-008844-001 Rev.5.0
CM17
91ch3002.fm