Isdn Pri Call By Call Service Selection - NEC Neax 2000 IVS2 Manual

ISDN PRI Call By Call Service Selection

[North America Only]
Available Services
The following Binary Facility Code can be sent to the ISDN network when the called party number
is flagged as a Service. Services and features are selected by the ISDN subscriber at the time
the ISDN is ordered. The PBX must be programmed to match the services and features provided
by the ISDN provider.
AT&T
SDN
Megacom
Megacom 800
Accunet
International 800
AT&T MultiQuest
Call By Call LCR Programming
The following programming steps is an example of a long-distance call placed to any area code
that begins with a 2 and that call is flagged as AT&T Megacom.
CM8A4005>12 (dialed #)=0001 (go to route pattern 001)
st
CM8A0001>1 (1 choice)=00010 (use LCR pattern 000 + trk route 10)
CM855>12=11 (maximum number of digits dialed)
CM8A5000>157=02 (Kind of called party=National)
CM8A5000>158=01 (Called party Number Plan ID=ISDN/Telephony Numbering Plan)
CM8A5000>159~161 are not used for this call.
CM8A5000>162=1 (Service)
CM8A5000>163=03 (Megacom)
CM8A5000>164 is not required for this call.
2
NEAX2000 IVS ISDN System Manual
ND-70919 (E), Issue 1.0
Northern Telecom
Private
InWATS
OutWATS
Foreign Exchange
Tie Trunk
(dialed number is 10-digit NANP, select National)
CHAPTER 3 SYSTEM DATA PROGRAMMING
ISDN Feature Programming
Page 91