Station Line Status Display; General Description; Service Conditions; Programming Procedure - NEC NEAX 2000 IVS2 Maintenance Manual

STATION LINE STATUS DISPLAY

General Description

This feature displays the line status for a single line telephone or a D
MAT.

Service Conditions

(1) This feature is not available when the system is off-line.
(2) When performing this feature for a single line telephone, this feature may affect the status
of the other telephone in the same line circuit card. Therefore, use this feature only when a
line fault has occurred (do not use under a normal state).

Programming Procedure

No programming is required.

Operating Procedure

Operation:
DE
EC1 +
X-XXXXXXXX + DE
(STATION NO.)
Explanation of Screen Information:
Station Number: X-XXXXXXXX (1-8 digits)
1
Analog Line/Digital Line
2
00: LC (Single Line Tel.)
10: DLC (D
Hardware Test
3
See Page 30.
2
NEAX2000 IVS Maintenance Manual
ND-70926 (E), Issue 3.0
ST COMMAND=
EC1>
XXXXXXXX : XX XX XX
term
)
CHAPTER 1 MAINTENANCE SERVICE FEATURES
XXXXXXXX : XX XX XX
4
1 2 3
Station Line Status Display
term
using the CAT or the
Page 29