Installing An Expansion Container - ABB IRB 2600 Product Manual

2 Installation and commissioning

2.5.2 Installing an expansion container

2.5.2 Installing an expansion container
Introduction to the expansion container
The expansion container is needed on suspended robots to make sure that the
amount of oil in gearbox axis 1 covers all important parts. Robots ordered as
suspended robots have the expansion container installed on delivery.
Expansion container
xx1000000318
A
B
C
D
E
F
G
H
Required equipment
Equipment
Expansion container
Lifting accessory
Lifting instruction
Grease
Continues on next page
102
Cover
Attachment screw M6x16, quality 8.8-A2F (5 pcs)
Oil expansion container with cover
Base
O-ring D220x5
Attachment screw M5x20, quality 8.8-A2F and washer (2+2 pcs)
O-ring D1=9.5 D2=1.6
Oil plug (to be removed)
© Copyright 2009-2015 ABB. All rights reserved.
Note
Kit including oil.
3HAC034766-001
Included with the lifting accessory.
-
Product manual - IRB 2600
3HAC035504-001 Revision: G